RAID is the storage technology that the computers use. It is the RAID technology which decides how the data should be stored in the hard drives on the computer. The computers will be having multiple hard drives in it where the data is stored according to the RAID array behavior. RAID 0, RAID 1, RAID 3, RAID 5 and RAID 10 are the different RAID levels. Each RAID level will be having its own criteria for arrangement of data on the hard drives. RAID 0 uses stripping method to store and retrieve data. RAID 0 splits the data and stores in the different drives. In the same way, the data can be read very fast. This increases the performance of the computer. If any of the disks is damaged then the data recovery is difficult. Likewise there are advantages and disadvantages of using each RAID technology. RAID 5 is one of the considerable RAID technologies with acceptable drawbacks.
In your daily busy life, it is common to mishandle the devices and drives of the computer while working on it. You may end up deleting a Windows or RAID partition from Windows system. In that case, you will lose your important data on the RAID partition. Can you recover data from RAID partition? Have you lost the data forever? These are the questions which will be on your mind. You need recovery software which can scan the RAID arrays to recover the files on it. You can effectively recover Windows partition using Windows partition recovery software. This software can recover your data from RAID partition if the RAID is intact. Else, you need to consult the experts for RAID array arrangement and data recovery.
File System corruption: The File System of the RAID partition may get corrupted. You will lose the access to the data in it in such case. The important data in the RAID partition will be lost. The OS can’t read the data as the File System is corrupted. In such situations, you need recovery software to restore corrupted partition. Windows partition recovery software is one of the reliable RAID partition recovery software.
Frequent reboots: The system will boot when the system is turned on. If the system turns off and on continuously then the system will reboot each time of turn on. You may not do it purposefully; the power surge may occur frequently which results in several reboots. Some of the system files may get damaged due to this and you may lose data from RAID partition. In such situation, you need to restore partition on hard drive using recovery software.
RAID controller failure: The RAID controller fails when the hardware fails or any unknown reason. The RAID partitions will go inaccessible. In such situation, you need to replace the controller and then use recovery software to get back the access to the data on your computer. Windows partition recovery software is one of the efficient RAID partition recovery software.
RAID array re-initialization: When the RAID array is re-initialized, you will lose the access to the data on the RAID partition. You may re-initialize the RAID by mistake or it may be because of faulty firmware up gradation. You need to scan for the data on the RAID partitions using recovery software. Windows partition recovery software helps you for RAID partition recovery.
The Windows partition recovery software performs RAID partition recovery effectively. You can recover accidentally deleted partition on Windows Vista, Windows 7, Windows 8 and Windows XP OS based computers. The software can scan for the data efficiently on RAID 0, RAID 1 and RAID 5 arrays and recover. You can even recover deleted or missing files using the software on different drives of the computer like memory card, USB flash drive, FireWire drive, iPod, etc. The software helps you to recover FAT and NTFS partitions on Windows. The software supports data recovery from SATA, SCSI, IDE, etc. hard drives. You can recover up to 300 file types using the software.
In case the partition table on any of your Windows Operating System gets deted or goes missing, you no more need to get panic stricken as now you can retrieve partition table back without any modification on your local machine just by perform frew clicks after downloading the program from this page. partition table recovery.
1: Download the software and install on the computer. Run the software and select "Recover Partitions / Drives" from the main screen of the software.
Figure 1: Select Recover Partitions / Drives
2: Select "Partition Recovery" from the next screen. Select the RAID partition and click "Next"to scan for the data from it.
Figure 2: Select Drive
3: After scanning, you will get the list of files which you had lost. Preview the files and save them on the computer.
Figure 3: Recovered files